|
|
Block of flats, Holešov
Sedláček, Tomáš ; Peterka, Tomáš (referee) ; Müller, Jan (advisor)
The thesis project is a residential building. The proposed building is located in the urban area in Holešov on plain plot suitable for the construction of a residential building. The building is designed as a four-storey basement building, which is roofed with a flat roof. There is designed a total of 14 flats of all categories. The building is designed from the concrete into the permanent formwork Velox, is founded on the foundation strips, roofing is designed as a flat roof of leaning wedges.
|
|
|
Apartment house
Pavlík, Marek ; Vorlíčková, Petra (referee) ; Donaťáková, Dagmar (advisor)
The theme of this bachelor thesis is realization of project documentation for new apartment building. The main aim is development of apartment building in Čejkovice, which will house four family with children. There are four maisonette flats, two of the have 5+KK disposition, garage and shared technical room. Two apartments are 4+KK, garage and shared technical room. The Building is designed as masoned with ceramic bricks HELUZ, based on the concrete strip foundation. Roof is designed as a roof truss made from collar beam system. Clay tile roofing Wienerberger is used as roof covering while the roof itself is pithched at 35°. The Ceiling above 1NP is designed as monolithic reinforced concrete slab 250mm thick. Staircase that leads to 2NP is designed as a wooden with wooden steps.
|
|
|
Congress centre Humpolec
Šrůta, Otto ; Pospíšil, Jaroslav (referee) ; Brzoň, Roman (advisor)
This thesis describes the design and processing of the convention center. The proposed house is located at the top of the square of Humpolec in the area designated for the construction of public facilities. The building consists of a basement, where there is a garage for the car owner and stores food for the kitchen. On the first floor there is a reception, restaurant and facilities for the kitchen. On the second floor are conference halls. In the third and fourth floor is accommodation for guests. The restaurant is designed for 55 people inside + outdoor terrace can seat about 30 people. Conference halls are designed for 90 people. Accommodation is for 28 guests. Outdoor parking is for 40 cars. Perimeter bearing walls are made of reinforced concrete + insulation. Interior bearing walls are made of reinforced concrete, interior non-bearing brick walls HELUZ. The ceilings are made of overstretched Spiroll panels and boards reinforced cross. For ceiling is plasterboard ceilings. The roof home is designed as a single-layer flat. Heating is effected by the heat pump. Wooden windows are six-chamber, aluminum doors. There is a staircase and an elevator. The proposed facility is designed wheelchair.
|
|
|
Detached house with solicitor´s office
Müller, David ; Fixelová, Veronika (referee) ; Kacálek, Petr (advisor)
The subject of my bachelor thesis is a new-building of a detached house with a solicitor’s office in Obora near Boskovice. The objects are separated from each other and each of them makes a separate unit. The building is located in the suburb of Obora in slightly sloping terrain. The “T” shaped house is designed for a four membered family with a comfort dispositive organization. The house is ground floor, partly with a cellar, roofed by a saddle roof with a traditional wooden trussing. The organization and size of the windows in both objects are designed in order to have a view to the countryside. The solicitor’s office is a ground floor object roofed by flat roof. It consists three offices, one meeting room and sanitary facilities. The structural system of both objects is longitudinal, wall. The vertical load-bearing constructions are made from cut ceramic blocks. The horizontal constructions in the detached house are monolithic, ferroconcrete and in the solicitor’s office they are half-prefabricated, ceramics-concrete. The project was made in AutoCad software application, 3D model in 3D modelling computer program SketchUp.
|
|
|
Timber House
Machala, Tibor ; Osička, Jan (referee) ; Lavický, Miloš (advisor)
This bachelor thesis is focused on design of the new family house with one flat unit and an establishment serving as a wine bar of the house owner. House is located in the cadastral territory Horní Věstonice. It is two-storey family house with basement for four member family. The perimeter structures of the basement are made from blocks of CSB 400 lost formwork, insulated with extruded polystyrene ISOVER STYRODUR 2800 C in thickness 100mm. Above-ground perimeter structures are made from wooden posts (50x140mm) axially distant 625mm. The spaces between the posts are filled with thermal isolation ISOVER ORSIK and covered by the SDK rigistabil 15.0. The walls are isolated with facade polystyrene ISOVER EPS 100F in thickness 100mm. Horizontal construction above 1S is made of inserts GARPET VST20 and GARPET 175 GPN beams from CS BETON. Horizontal construction above 1NP is made of wooden planks placed on a stand with gratification and the lid. The building is roofed by a saddle roof with a 30 ° tilt. The terrace at level 1NP is made of wooden construction. The staircase is wooden, partially curved. Entrance to the land and to the family house is from the south side, to the wine bar is entrance on the north side. On the north side of the land is designed parking place for four cars. Bachelor thesis is elaborated in the form of project documentation for construction.
|
|
|
Multi-storey Wooden Building
Macháčková, Eva ; Havířová, Zdeňka (referee) ; Lavický, Miloš (advisor)
Master’s thesis deals with complete project documentation of newly built object of library and mediatheque located on the site in České Budějovice. It is a three-storey building divided into three parts, one-storey, two-storey and three-storey. It is partly basement. The underground part is devoted to main storage spaces of library services, management offices and social facilities for staff (toilets, changing rooms, washrooms). This part of the building has own entrance for employees. In the 1st floor is located the main library area along with exhibition spaces and the main entrance for visitors with self service cloakroom. In the 2nd floor are designed library spaces for visually impaired persons with fund of audio books, CDs and DVDs, a lecture hall with a projector and own kitchen and space for reading magazines and periodicals. From this floor is possible access to the outdoor terrace, which has own terrace furniture store nearby. In the 3rd floor is located a literary café with its own facilities. In each floor are also designed sanitary facilities for use by persons with limited ability of movement and orientation. All floors are connected by stairs and passenger lifts. In terms of construction, the building is designed as a frame, in the underground parts made of reinforced concrete, the overhead of glued laminated timber elements. The ceiling structure designed over the underground floor is monolithic reinforced concrete slab. The ceilings in the upper part are designed as a wooden beamed made of the glued laminated timber elements. The building has a pent roof created by wooden trusses assembled with punched metal plate fasteners. The foundations are designed as belts and footings. The study, detailed documentation, thermal-technical evaluation of selected structures and fire safety of the building are processed. For processing of the thesis were used software AutoCAD 2010, Teplo 2011, Area 2011, Ztráty 2011 and Fire NX 802 PRO.
|
|
|
Detached house
Navrátil, Radek ; Struhala, Karel (referee) ; Jelínek, Petr (advisor)
The bachelor thesis is focused on a design for new-building of family house with an establishment of travel agency. The new building is placed in a cadastral area of the town Prostějov. The building is with two floors, without a basement and is designed for living of four persons with small travel agency, equipped with necessary accessories. Exterior walls are designed in the Ytong system and partly from a concrete blocks. Walls are insulated by contact thermal insulation. A ceiling strcuture is designed as a reinforced concrete slab. Building has a saddle roof. The bachelor thesis is formed as a project documentation.
|
|
|
Apartment house
Pavlík, Marek ; Vorlíčková, Petra (referee) ; Donaťáková, Dagmar (advisor)
The theme of this bachelor thesis is realization of project documentation for new apartment building. The main aim is development of apartment building in Čejkovice, which will house four family with children. There are four maisonette flats, two of the have 5+KK disposition, garage and shared technical room. Two apartments are 4+KK, garage and shared technical room. The Building is designed as masoned with ceramic bricks HELUZ, based on the concrete strip foundation. Roof is designed as a roof truss made from collar beam system. Clay tile roofing Wienerberger is used as roof covering while the roof itself is pithched at 35°. The Ceiling above 1NP is designed as monolithic reinforced concrete slab 250mm thick. Staircase that leads to 2NP is designed as a wooden with wooden steps.
|
|
|
Detached house
Navrátil, Radek ; Struhala, Karel (referee) ; Jelínek, Petr (advisor)
The bachelor thesis is focused on a design for new-building of family house with an establishment of travel agency. The new building is placed in a cadastral area of the town Prostějov. The building is with two floors, without a basement and is designed for living of four persons with small travel agency, equipped with necessary accessories. Exterior walls are designed in the Ytong system and partly from a concrete blocks. Walls are insulated by contact thermal insulation. A ceiling strcuture is designed as a reinforced concrete slab. Building has a saddle roof. The bachelor thesis is formed as a project documentation.
|
|
|
Detached house with solicitor´s office
Müller, David ; Fixelová, Veronika (referee) ; Kacálek, Petr (advisor)
The subject of my bachelor thesis is a new-building of a detached house with a solicitor’s office in Obora near Boskovice. The objects are separated from each other and each of them makes a separate unit. The building is located in the suburb of Obora in slightly sloping terrain. The “T” shaped house is designed for a four membered family with a comfort dispositive organization. The house is ground floor, partly with a cellar, roofed by a saddle roof with a traditional wooden trussing. The organization and size of the windows in both objects are designed in order to have a view to the countryside. The solicitor’s office is a ground floor object roofed by flat roof. It consists three offices, one meeting room and sanitary facilities. The structural system of both objects is longitudinal, wall. The vertical load-bearing constructions are made from cut ceramic blocks. The horizontal constructions in the detached house are monolithic, ferroconcrete and in the solicitor’s office they are half-prefabricated, ceramics-concrete. The project was made in AutoCad software application, 3D model in 3D modelling computer program SketchUp.
|
guest ::
